Captiva

Oil Filter with Cap and Seal Installation - LE5 or LE9

Special Tools

EN-44887 Oil Filter Spanner

For equivalent regional tools, refer to Special Tools : LE5 or LE9 .

1. Install a new oil filter (2) on the oil filter cap (1).
2. Lubricate the O-ring on the oil filter cap with 5W30 engine oil.

Caution: Refer to Fastener Caution in the Preface section.

3. Use EN-44887 wrench to install the oil filter cap. Tighten the oil filter cap to 22 N·m (16 lb ft).