Preliminary Procedures

1. Remove the rear transmission mount. Refer to Transmission Rear Mount Replacement : AWD  → FWD .
2. If equipped with 2.4L engine, remove the catalytic converter. Refer to Catalytic Converter Replacement : LE5 .
3. If equipped with 3.0L engine, remove the right side catalytic converter. Refer to Catalytic Converter Replacement - Right Side : LF1 .

1

Rear Transmission Mount Bracket Bolt

Caution: Refer to Fastener Caution in the Preface section.

Tighten
57 N·m (42 lb ft)

2

Rear Transmission Mount Bracket Bolt (Diesel Engine Only)

Tighten
57 N·m (42 lb ft)

3

Rear Transmission Mount Bracket Bolt (Qty: 3)

Tighten
100 N·m (74 lb ft)

4

Rear Transmission Mount Bracket