Cruze

Intake Manifold Assemble

1. Install the intake air pressure and temperature sensor gasket (4).
2. Install the intake air pressure and temperature sensor (2).

Caution: Refer to Fastener Caution in the Preface section.

3. Install the intake air pressure and temperature sensor bolt (3) and tighten to  8 N·m (71 lb in).
4. Install the coolant temperature sensor (1) and tighten to  35 N·m (26 lb ft).



5. Install the thermostat (2) to the intake manifold (1).
6. Install the thermostat housing gasket (5).
7. Install the thermostat housing (3).
8. Install the 2 thermostat housing bolts (4) and tighten to  23 N·m (17 lb ft).