Cruze

Transmission Rear Mount Replacement - Hydraulic Power Steering

1. Remove the rear transmission bracket mount. Refer to Transmission Mount Bracket Replacement - Rear .



2. Remove the transmission mount to frame bolts (1).
3. Remove the transmission mount (2).

1. Install the transmission mount (2).

Caution: Refer to Fastener Caution in the Preface section.

2. Install the transmission mount to frame bolts (1) and tighten to 110 N·m(82 lb ft).
3. Install the rear transmission bracket mount. Refer to Transmission Mount Bracket Replacement - Rear .