Cruze

Air Inlet Valve and Inside Air Valve Control Cam Replacement — Left Hand Drive

1. Remove instrument panel compartment assembly. Refer to Instrument Panel Compartment Replacement .




Note: The graphic shows Air Inlet Housing without attaching parts for better clarity.

2. Disconnect electrical connector and remove mode control cam actuator screws (2) and remove mode control cam actuator (1).



3. Remove air inlet valve and inside air valve control cam (1).

Note: The air inlet valve and inside air valve control cam can only be fitted in one position.

1. Install air inlet valve and inside air valve control cam (1).

Caution: Refer to Fastener Caution in the Preface section.




2. Install mode control cam actuator (1) and Install mode control cam actuator screws (2) and connect electrical connector.

Tighten
2.5 N·m (23 lb in)

3. Install instrument panel compartment assembly. Refer to Instrument Panel Compartment Replacement .