Cruze

Glow Plug Replacement

1. Open the hood.
2. Remove the turbocharger. Refer to Turbocharger Replacement .
3. Remove the exhaust manifold heat shield. Refer to Exhaust Manifold Heat Shield Replacement .



4. Remove the 4 glow plug wiring harness plugs (1).



5. Remove the 4 glow plugs (1).

Caution: Refer to Fastener Caution in the Preface section.




1. Install the 4 glow plugs (1) and tighten to  9 N·m (80 lb in).



2. Install the 4 glow plug wiring harness plugs (1).
3. Install the engine lift bracket nut and tighten to  28 N·m (21 lb ft).
4. Install the 3 glow plug heat shield bolts and tighten to  20 N·m (15 lb ft).
5. Install the exhaust manifold heat shield. Refer to Exhaust Manifold Heat Shield Replacement .
6. Install the turbocharger. Refer to Turbocharger Replacement .
7. Close hood.