Service Information

Cruze

Heated Oxygen Sensor Replacement - Sensor 1

Callout	Component Name
Preliminarily Procedures Remove the exhaust manifold heat shield. Refer to Exhaust Manifold Heat Shield Replacement .
1	Heated Oxygen Sensor Warning: In order to avoid being burned, do not service the exhaust system while it is still hot. Service the system when it is cool. Caution: Refer to Fastener Caution in the Preface section. Note: When re-using the heated oxygen sensor, coat the thread with assembly paste. Tighten 50 N·m (37 lb ft) Special Tools Use the EN-6179 Remover/Installer . For equivalent regional tools, refer to Special Tools .

Callout

Component Name

Remove the exhaust manifold heat shield. Refer to Exhaust Manifold Heat Shield Replacement .

Heated Oxygen Sensor

Warning: In order to avoid being burned, do not service the exhaust system while it is still hot. Service the system when it is cool.

Caution: Refer to Fastener Caution in the Preface section.

Note: When re-using the heated oxygen sensor, coat the thread with assembly paste.

Tighten
50 N·m (37 lb ft)

Use the EN-6179 Remover/Installer .

For equivalent regional tools, refer to Special Tools .