Cruze

Hydraulic Valve Lash Adjuster Replacement

Special Tool

EN 845 Suction Device

For equivalent regional tools, refer to Special Tools .

1. Open hood.
2. Remove the camshafts. Refer to Camshaft Replacement .




Note: Mark the assignments.

3. Remove the 16 hydraulic valve lash adjuster (1) use the EN 845 Suction Device .
4. Prevent the hydraulic valve lash adjuster for contamination with dirt.

Note: 

•	Observe the correct assignment.

•	Coat the sliding surfaces with NEW engine oil.

1. Install the 16 hydraulic valve lash adjuster (1) use the EN 845 suction device .
2. Install the camshafts. Refer to Camshaft Replacement .
3. Close the hood.