To the top of the document
Cruze
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Fuel Injection Pump Drive Pulley Installation

Special Tools

EN-6603 Bracket

For equivalent regional tools, refer to Special Tools .


    2189517

    Note: The notch in the fuel injection pump drive pulley and the cam (1) must align.

  1. Install the fuel injection pump drive pulley (2).

    2. 2189444
  2. Install EN-6603 bracket in order to fix the fuel injection pump drive pulley. The bracket (1) must support to the crankshaft pulley as shown (2).

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the fuel injection pump drive pulley nut and tighten to 69 N·m (51 lb ft) while holding up the fuel injection pump drive pulley.
   


© Copyright Chevrolet. All rights reserved