To the top of the document
Cruze
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Turbocharger Oil Feed Pipe Installation


    2373125
  1. Install the turbocharger oil feed pipe (3) and 2 NEW turbocharger oil feed pipe gaskets (2).
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the 2 banjo bolts (1) to the turbocharger oil feed pipe (3) and tighten to 32 N·m (24 lb ft).
  4. Install the turbocharger oil feed pipe bracket bolt (5) and tighten to 10 N·m (89 lb in).
  5. Clip the wiring harness exhaust temperature sensor plug (4) to the turbocharger oil feed pipe bracket.
   


© Copyright Chevrolet. All rights reserved