To the top of the document
Cruze
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Transmission Control Replacement

Removal Procedure
  1. Remove front floor console. Refer to Front Floor Console Replacement .

    2. 2512585
  2. Unlock gear lever and selector lever cable adjust locks (1).
  3. Clip shift lever and selector lever cable (3) out of transmission control lever housing (2).

    4. 2191407
  4. Remove 4 transmission control lever bolts (1).
  5. Remove transmission control lever (2).

Installation Procedure

    2191407
  1. Install NEW transmission control lever (2).

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install 4 transmission control lever bolts (1) and tighten to 8 N·m (71 lb in).

    3. 2512585
  3. Slide shift lever and selector lever cable into shift lever and selector lever cable adjust locks (1).

    4. Note: Do not lock yet.

  4. Clip shift lever and selector lever cable (3) into transmission control lever housing (2).
  5. Adjust shift lever and selector lever cable. Refer to Manual Gearbox Gear Lever and Selector Lever Cable Adjustment .
   


© Copyright Chevrolet. All rights reserved