1
| Liftgate
Caution : Refer to Fastener Caution in the Preface section.
Procedure
- Loosen the liftgate hinge bolts (Qty: 4).
- Adjust the tailgate in order to obtain an even gap on both sides between the tailgate and the quarter outer panel, the rear bumper fascia and the roof and so that the tailgate is flush with the quarter outer panel, the rear bumper fascia and the roof.
Adjustment
| • | Liftgate to rear bumper fascia |
| | (a) 5.5 mm ± 1.0 mm (0.22 in ±0.04 in) |
| • | Liftgate to quarter outer panel |
| | (b) 4 mm ± 1 mm (0.16 in ± 0.04 in) |
| • | Liftgate to quarter outer panel |
| | (c) 4 mm ± 1 mm (0.16 in ± 0.04 in) |
| | (d) 5.5 mm ± 1 mm (0.22 in ± 0.04 in) |
Tighten
22 N·m (16 lb ft) |
