To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Paint Gauges

Paint thickness gauges measure the total thickness of the vehicle finish. It is important to accurately measure the thickness of the finish on each vehicle as the thickness of the finish will vary on each vehicle. Use a paint gauge before the sanding process in order to accurately measure how much finish there is to remove before, during, and after the sanding process. Paint gauges range from magnetic pull type to sophisticated electronic types, and are available from a variety of sources. The older magnetic type gauges, at best have a 5 percent accuracy range and are not sensitive enough to detect removal of 0.02 mm 0.5 mil (0.0005 in) clearcoat. The newer type magnetic gauges have improved accuracy ranges. Most gauges are confined to checking either ferrous metal, steel, non-ferrous metal, or aluminium panels. At this time, there are no viable gauges for reading film thickness on composite (SCM doors, RIM wings) panels. The more sophisticated (ETG) electronic paint thickness gauges, digital type gauges, are able to read film thickness on both ferrous and non-ferrous metal panels. Digital ETG gauges may have an accuracy range of 1 percent and include thickness standards for recalibration. The following paint thickness gauges are available. Call 1-800-GM-TOOLS for information:

Paint Thickness Gauges

    • 147-5437-ETG Standard model
    • 147-5437-ETG-P Standard model with print option
    • 147-5437-N-ETG-N Non-ferrous model for aluminum panels
    • 147-5437-NP-ETG-NP Non-ferrous model with print option
    • 147-54437-SD-ETG Steel and aluminum gauge
   


© Copyright Chevrolet. All rights reserved