To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Torque Converter Housing with Fluid Pump Assembly Installation — 6T40/6T45/6T50 Non Hybrid


1891439

Callout

Component Name

1

Fluid Pump Seal Assembly

2

Torque Converter Housing Gasket

3

Torque Converter (w/Fluid Pump) Housing Assembly

Tip
Rotate the differential slightly in each direction using the rotating tool to align the Differential Pinion Gears with the Differential Ring Gear in the Torque Converter Housing.

    • DT-47793 Differential Rotating Tool for 6T40/45 applications
    • DT-49938 Differential Rotating Tool for 6T50 applications

Special Tools

    • DT-47793 Differential Rotating Tool
    • DT-49938 Differential Rotating Tool

For equivalent regional tools, refer to Special Tools .

4

Torque Converter and Differential Housing Bolts M8 x 30 (Qty: 15)

Caution: Refer to Fastener Caution in the Preface section.

Procedure

Tighten the bolts in sequence shown.

Tighten
10 N·m (89 lb in) then rotate the bolt an additional 50 degrees

Special Tool

EN-45059 Angle Metre or equivalent

For equivalent regional tools, refer to Special Tools .

   


© Copyright Chevrolet. All rights reserved