To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Measuring Voltage Drop

Special Tools

EL-39200 Digital Multimeter (DMM)

For equivalent regional tools, refer to Special Tools .

Caution: Refer to Test Probe Caution in the Preface section.

The following procedure determines the difference in voltage potential between 2 points.


61704
  1. Set the Digital Multimeter (DMM) to the V (DC) position.
  2. Connect the positive lead of the DMM to one point of the circuit to be tested.
  3. Connect the negative lead of the DMM to the other point of the circuit.
  4. Operate the circuit.
  5. The DMM displays the difference in voltage between the 2 points.
   


© Copyright Chevrolet. All rights reserved