To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Speedometer Driven Gear Replacement

Removal Procedure


    2027601
  1. Disconnect the electrical connector (1) from the speedometer driven gear (2).

  2. 2027602
  3. Remove the speedometer bolt (2).
  4. Remove the speedometer driven gear (1).

Installation Procedure


    2027602
  1. Coat the speedometer driven gear washer with speedometer driven gear lubricant.
  2. Install the speedometer driven gear (1).
  3. Caution: Refer to Fastener Caution in the Preface section.

  4. Install the speedometer bolt and tighten to 4 N·m (36 lb in).

  5. 2027601
  6. Connect the electrical connector (1) to the speedometer driven gear (2).
   


© Copyright Chevrolet. All rights reserved