To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Looseness in Steering Column

Step

Action

Yes

No

1

Did you review the Steering Wheel and Column Description and Operation and perform the necessary inspections?

Go to Step 2

Go to Steering Wheel and Column Description and Operation

2

Verify that the steering column is loose.

Is the steering column loose?

Go to Step 3

System OK

3

Inspect the steering column mounting features for the following conditions.

    • Steering column mounting fasteners for looseness
    • Steering column mounting features are sheared

Are the steering column mounting features loose?

Go to Step 5

Go to Step 4

4

Inspect the upper and/or lower bearings for looseness.

Are any of the bearings worn or loose?

Go to Step 6

Go to Step 7

5

Note: If the steering column mounting feature is damaged or sheared, the steering column will need to be replaced. Refer to Steering Column Replacement .

Tighten the steering column mounting fasteners to specifications. Refer to Fastener Tightening Specifications .

Did you complete the repair?

Go to Step 7

6

Note: If the steering column upper and/or lower bearings are not serviceable, the steering will need to be replaced. Refer to Steering Column Replacement .

Replace the upper and/or lower bearings, if serviceable.

Did you complete the repair?

Go to Step 7

7

Operate the steering column in order to verify the repair.

Did you correct the condition?

System OK

Go to Step 3

   


© Copyright Chevrolet. All rights reserved