Orlando

Battery Negative Cable Disconnection and Connection - without Start/Stop System

1. Turn on the radio and record all of the customer radio station presets.
2. Ensure that all lamps and accessories are turned off.
3. Turn the ignition OFF and remove the ignition key.



4. Remove the battery cover (1).

Warning: Refer to Battery Disconnect Warning in the Preface section.




5. Loosen the battery negative cable nut (2).
6. Remove the battery negative cable (1) from the battery.

1. Install the battery negative cable (1) to the battery.

Caution: Refer to Fastener Caution in the Preface section.

2. Fasten the battery negative cable nut (2) and tighten the nut to 4.5 N·m (40 lb in).



3. Install the battery cover (1).
4. Insert the ignition key and turn the ignition to the ON position.
5. Program volatile memory. Refer to Volatile Memory Programming .
6. Program all of the customer's radio station presets and set the radio clock to the current time.