To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Heated Oxygen Sensor Replacement - Sensor 1 — LDE, LXV, LUW, 2H0


2027720

Callout

Component Name

Warning: In order to avoid being burned, do not service the exhaust system while it is still hot. Service the system when it is cool.

Preliminary Procedures

Disconnect the battery negative cable. Refer to  Battery Negative Cable Disconnection and Connection : without Start/Stop System .

1

Heated Oxygen Sensor

Caution: Refer to Fastener Caution in the Preface section.

Procedure

  1. Disconnect the heated oxygen sensor wiring harness connector.
  2. Remove the heated oxygen sensor.
  3. When re-using the heated oxygen sensor, coat the thread with assembly paste.

Tighten
42 N·m (31 lb ft)

Special Tools

EN-6179 Heated Oxygen Sensor Remover / Installer

For equivalent regional tools, refer to Special Tools .

   


© Copyright Chevrolet. All rights reserved