To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Timing Belt Idler Pulley Replacement

Removal Procedure

  1. Remove the timing belt. Refer to Timing Belt Replacement : 1.6L LDE, LXV, 1.8L 2H0, LUW and LFH .

  2. 2026843
  3. Remove and DISCARD the timing belt idler pulley bolt (1).
  4. Remove the timing belt idler pulley (2).

Installation Procedure


    2026843
  1. Clean the timing belt idler pulley thread.
  2. Caution: Refer to Fastener Caution in the Preface section.

    Caution: Refer to Torque-to-Yield Fastener Caution in the Preface section.

    Note: Use an assembly tool.

  3. Install the timing belt idler pulley (2) and the NEW bolt (1) with screw locking compound. Refer to Adhesives, Fluids, Lubricants, and Sealers .
  4. Tighten the NEW bolt (1) to 25 N·m (18 lb ft).
  5. Install the timing belt. Refer to Timing Belt Replacement : 1.6L LDE, LXV, 1.8L 2H0, LUW and LFH .
   


© Copyright Chevrolet. All rights reserved