To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Wheel Alignment - Steering Wheel Angle and/or Front Toe Adjustment


    2028016
  1. Ensure that the steering wheel is set in a straight ahead position.
  2. Loosen the track rod jam nut (1).
  3. Adjust the toe to specification by turning the inner tie rod (2). Refer to Wheel Alignment Specifications .
  4. Caution: Refer to Fastener Caution in the Preface section.

  5. Tighten the track rod jam nut (1) to 60 N·m (44 lb ft).
   


© Copyright Chevrolet. All rights reserved