To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Camshaft Removal


    2026542

    Note: Note removal sequence 1-4.

  1. Remove the 4 camshaft bearing cap bolts.
  2. Note: Release the bearing support by striking it gently with a plastic hammer.

  3. Remove the first camshaft bearing cap (1).

  4. 2027653
  5. Loosen the 8 exhaust camshaft bearing cap bolts, working from outside to inside in a spiral in steps of 1/2 up to 1 turn.
  6. Remove the 8 exhaust camshaft bearing cap bolts.
  7. Note: Mark camshaft bearing caps before removal.

  8. Remove the 4 exhaust camshaft bearing caps numbers 6-9 from the cylinder head.
  9. Remove the exhaust camshaft (1).

  10. 2027651
  11. Loosen the 8 inlet camshaft bearing cap bolts, working from outside to inside in a spiral in steps of 1/2 up to 1 turn.
  12. Remove the 8 inlet camshaft bearing cap bolts.
  13. Note: Mark camshaft bearing caps before removal.

  14. Remove the 4 inlet camshaft bearing caps numbers 2-5 from the cylinder head.
  15. Remove the inlet camshaft (1).
  16. Remove the camshaft seal rings.
   


© Copyright Chevrolet. All rights reserved