To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Engine Flywheel Installation — LDE, LED, LFJ, LXV, 2H0, LUW

Special Tools

    • EN-652 Flywheel Holder
    • EN-45059 Torque Angle Sensor Kit

For equivalent regional tools, refer to Special Tools .

  1. Clean the thread in the crankshaft.

  2. 2026535
  3. Install the flywheel (2).
  4. Install the EN-652 holder (1).
  5. Caution: Refer to Fastener Caution in the Preface section.

    Caution: Refer to Torque-to-Yield Fastener Caution in the Preface section.


    2026536
  6. Install the 6 NEW flywheel bolts (1, 2) and tighten the bolts in 3 passes using the EN-45059 sensor kit :
  7. 4.1. First pass to 35 N·m (26 lb ft).
    4.2. Second pass to additional 30°.
    4.3. Third pass to an additional 15°.
  8. Remove the EN-652 holder .
   


© Copyright Chevrolet. All rights reserved