To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Multimedia Player Interface Module Scan Tool Information

Multimedia Player Interface Module Scan Tool Data Parameters

Parameter

Expected Value

Definition

Operating Conditions: Ignition ON/Engine OFF/Radio ON

GM Part Number

Varies

The scan tool displays the part number.

Calibration Part Number 1

Varies

The scan tool displays the primary software part number.

Calibration Part Number 2

Varies

The scan tool displays the primary calibration part number

Battery Voltage

Varies

The scan tool displays volts. This is the voltage input supplied to the Multimedia Player Interface Module.

USB Device Detection

Inactive

The scan tool displays Active or Inactive. Being active indicates a USB device is connected.

Aux IN Detection

Inactive

The scan tool displays Active or Inactive.

Sensing & Status. This parameter displays active when a device present on AUX In (ministereo plug).

USB Overcurrent Protection

Inactive

The scan tool displays Active or Inactive. USB over current detection indicates a USB device is drawing too much current and the USB functionality of the device is turned OFF.

Bluetooth Device Detection

Inactive

The scan tool displays Active or Inactive. Active indicates a Bluetooth device connected.

Mute Status

Mute OFF

The scan tool displays Mute OFF or Mute ON. This parameter displays the status of the mute.

Audio Source Status

Internal

The scan tool displays Internal Source, AUX or Bluetooth.This parameter displays the source of the audio.

USB Power Status

OFF

The scan tool displays OFF or ON. This is the status of the USB power.

Connected Device Type 1

None

The scan tool displays None, USB Mass Storage Device, USB Media Transfer Protocol Device, Media Player - iPod, Bluetooth, AUX, Media Player - Zune, or Device Inserted But Not Supported. This parameter displays the type of auxiliary input source connected.

Connected Device Type 2

None

The scan tool displays None, USB Mass Storage Device, USB Media Transfer Protocol Device, Media Player - iPod, Bluetooth, AUX, Media Player - Zune, or Device Inserted But Not Supported. This parameter displays the type of auxiliary input source connected.

Connected Device Type 3

None

The scan tool displays None, USB Mass Storage Device, USB Media Transfer Protocol Device, Media Player - iPod, Bluetooth, AUX, Media Player - Zune, or Device Inserted But Not Supported. This parameter displays the type of auxiliary input source connected.

Connected Device Type 4

None

The scan tool displays None, USB Mass Storage Device, USB Media Transfer Protocol Device, Media Player - iPod, Bluetooth, AUX, Media Player - Zune, or Device Inserted But Not Supported. This parameter displays the type of auxiliary input source connected.

Bluetooth Signal Strength

DB

The scan tool displays the signal strength of the Bluetooth connection.

   


© Copyright Chevrolet. All rights reserved