To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Front Wheel Speed Sensor Replacement

Removal Procedure

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the tyre and wheel assembly. Refer to Tyre and Wheel Removal and Installation .

  3. 2028087
  4. Remove the wheel speed sensor screw (2) from the steering knuckle.
  5. Remove the wheel speed sensor (1).

  6. 2028088
  7. Remove the wiring harness retainers from the frame.
  8. Disconnect the electrical connector.
  9. Remove wheel speed sensor (1) from the vehicle.

Installation Procedure


    2028088
  1. Install the wheel speed sensor (1) to the vehicle.
  2. Connect the electrical connector.
  3. Install the wiring harness retainers to the frame.

  4. 2028087
  5. Install the wheel speed sensor (1) to the steering knuckle.
  6. Caution: Refer to Fastener Caution in the Preface section.

  7. Install the wheel speed sensor screw (2) and tighten to 9 N·m (80 lb in).
  8. Install the tyre and wheel assembly. Refer to Tyre and Wheel Removal and Installation .
   


© Copyright Chevrolet. All rights reserved