To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Crankshaft Front Oil Seal Removal

Special Tools

EN-45000 Remover

For equivalent regional tools, refer to Special Tools .


2501418

Caution: Clean the crankshaft sealing surface with a clean, lint-free towel. Inspect lead-in edge of crankshaft for burrs/sharp edges that could damage the rear main oil seal. Remove burrs/sharp edges with crocus cloth before proceeding.

Using the EN-45000 remover (3), remove the crankshaft front oil seal (1) from the crankshaft (2).

   


© Copyright Chevrolet. All rights reserved