Orlando

Automatic Transmission Flex Plate Installation — LDE, LED, LFJ, LXV, 2H0, LUW, LFH

Special Tools

EN-652 Automatic Transmission Flex Plate Holder

For equivalent regional tools, refer to Special Tools .

1. Clean the automatic transmission flex plate bolt threads.



2. Install the automatic transmission flex plate (2) and the EN-652 holder to hold the automatic transmission flex plate (2).

Caution: Refer to Fastener Caution in the Preface section.

Caution: Refer to Torque-to-Yield Fastener Caution in the Preface section.




3. Install the 6 NEW automatic transmission flex plate bolts (2) and tighten the bolts to 60 N·m (44 lb ft) ± 5°.
4. Remove the EN-652 holder .