To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Stabilizer Shaft Link Replacement


2027726

Callout

Component Name

Preliminary Procedures

  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Remove the front tyre and wheel assemblies. Refer to Tyre and Wheel Removal and Installation .

1

Stabiliser Shaft Link Nut (Qty: 2)

Warning: Refer to Torque-to-Yield Fastener Warning in the Preface section.

Caution: Refer to Fastener Caution in the Preface section.

Procedure

Install NEW stabiliser shaft link nut. Do NOT reuse old nut.

Tighten
65 N·m (48 lb ft)

2

Stabiliser Shaft Link

   


© Copyright Chevrolet. All rights reserved