To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Power Steering Pump Belt Installation

Special Tools

CH-49800 Installer


    2189253
  1. Relieve the tension of the drive belt (1). Refer to Drive Belt Replacement
  2. Install CH-49800 installer (3) on the power steering pump pulley.
  3. Install NEW power steering belt (2) aligning pulley water pump.
  4. Rotate the power steering pump pulley clockwise using hex wrench on the shaft power steering pump pulley.
  5. Remove the CH-49800 installer (3).
  6. Check the belt is installed properly.
   


© Copyright Chevrolet. All rights reserved