To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Input Shaft and Main Shaft Installation


2188775

Callout

Component Name

1

Input Shaft and Main Shaft

Procedure

  1. Compress the circlip at the base of the main shaft and hold with DT-36633 circlip retainer.
  2. Hold the circlip open at the base of the input shaft with the circlip pliers.
  3. Install the input shaft/main shaft assembly onto the transmission case.
  4. Release the main shaft circlip and the input shaft circlip.

Special Tools

DT-36633 Circlip Retainer

   


© Copyright Chevrolet. All rights reserved