Orlando

Radiator Outlet Hose Replacement — LAF

Special Tools

J 38185 Hose Clamp Pliers

1. Drain the cooling system. Refer to Cooling System Draining and Filling .
2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .



3. Disengage tension on the radiator outlet hose clamp (1) at the radiator using J 38185 Hose Clamp Pliers .
4. Remove the radiator outlet hose (2) from the radiator.



5. Remove radiator outlet hose bracket retainer (1).
6. Disengage tension on the radiator outlet hose clamp (2) at the thermostat housing using J 38185 Hose Clamp Pliers .
7. Remove the radiator outlet hose (4) from the thermostat housing.
8. Disengage tension on the radiator outlet hose clamp (3) at the engine oil cooler using J 38185 Hose Clamp Pliers .
9. Remove the radiator outlet hose (4) from the engine oil cooler.
10. Remove the radiator outlet hose from the vehicle.

1. Install radiator outlet hose to the vehicle.




Note: Lubricate the inside diameters of the hose with clean coolant prior to installation.

2. Install the radiator outlet hose (4) to the engine oil cooler.
3. Engage tension on the radiator outlet hose clamp (3) at the engine oil cooler using J 38185 Hose Clamp Pliers .
4. Install the radiator outlet hose (4) to the thermostat housing.
5. Engage tension on the radiator outlet hose clamp (2) at the thermostat housing using J 38185 Hose Clamp Pliers .
6. Install radiator outlet hose bracket retainer (1).



7. Install the radiator outlet hose (2) to the radiator.
8. Engage tension on the radiator outlet hose clamp (1) at the radiator using J 38185 Hose Clamp Pliers .
9. Lower the vehicle.
10. Fill the cooling system. Refer to Cooling System Draining and Filling .