To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Engine Oil Cooler Installation

  1. Clean the engine oil cooler to the oil filter housing sealing surfaces.

  2. 2188658
  3. Install the NEW engine oil cooler gasket (2) and the engine oil cooler (1) to the engine oil cooler housing.
  4. Caution: Refer to Fastener Caution in the Preface section.

  5. Install the 6 engine oil cooler bolts (3) and tighten to 8 N·m (71 lb in).
   


© Copyright Chevrolet. All rights reserved