To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Water Pump Pulley Installation


    2026887

    Note: Counterhold the crankshaft balancer. The belt has to be installed for this procedure.

  1. Install the water pump pulley (2) to the water pump (3).
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the 3 water pump pulley bolts (1) with locking compound. Refer to Adhesives, Fluids, Lubricants, and Sealers .
  4. Tighten the 3 water pump pulley bolts (1) to 20 N·m (15 lb ft).
   


© Copyright Chevrolet. All rights reserved