Orlando |
||||||||
|
|
|
|||||||
The power steering control module scan tool data parameters list contains all power steering related parameters that are available on the scan tool. The list is arranged in alphabetical order. A given parameter may appear in any one of the data lists.
Parameter | System State | Expected Value | Description |
|---|---|---|---|
Operating Conditions: Ignition ON | |||
Battery Voltage | -- | Varies | This displays battery voltage. |
Calculated System Temperature | -- | Varies | This is the calculated temperature of the power steering system. |
Power Steering Control Module Centre Procedure | -- | Varies | The scan tool displays if the centre procedure has been completed or not. |
Power Steering Control Module SPS Calibration Status | -- | Varies | The scan tool displays if the calibration status has been completed or not. |
Steering Input Torque | -- | Varies | This displays N·m. This is the calculated force of the steering shaft, as monitored by the power steering control module. |
Steering Wheel Angle | -- | Varies | This displays the steering wheel angle in degrees. |
Vehicle Speed | -- | Varies | The scan tool displays the vehicle speed value. |
Worm Gear Wear Counter | -- | Varies | This parameter displays the thermal cycle counter in percentage |
Worm Gear Wear Counter Copied | -- | Yes | This parameter display the electric power steering thermal cycle counter Copy status. |
| © Copyright Chevrolet. All rights reserved |
