To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Steering Angle Sensor Initialisation Warning

Warning: For vehicles with electric power steering (EPS) and without a vehicle stability enhancement program, the steering angle sensor MUST always be initialised after the battery has been disconnected. Failure to initialise the steering angle sensor could limit the operation of the EPS system and result in personal injury.

To ensure proper initialisation of the EPS system, do the following:

  1. The engine should be running with the vehicle stationary.
  2. Turn the steering wheel anti-clockwise until it stops.
  3. Turn the steering wheel clockwise until it stops.

   


© Copyright Chevrolet. All rights reserved