Preliminary Procedures

Remove the battery tray. Refer to Battery Tray Replacement

1

Transmission Fluid Cooler Pipe Nut

Caution: Refer to Fastener Caution in the Preface section.

Tighten
22 N·m (16 lb ft)

2

Sealing Washer

Procedure

DISCARD the sealing washer and use NEW only.

3

Transmission Fluid Cooler Inlet Hose

Procedure

1. Disconnect the transmission line from the radiator and transmission. Refer to Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection .
2. Note the routing of the transmission line to ensure proper installation.
3. Remove the transmission line from the clips securing the line to the transmission and fan shroud.
4. Inspect the transmission fluid level. Refer to Transmission Fluid Level and Condition Check .