To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Transmission Rear Mount Replacement — Hydraulic Power Steering

Removal Procedure

  1. Remove steering gear. Refer to Steering Gear Replacement : Hydraulic Power Steering → Electronic Power Steering .
  2. Remove transmission rear mount bracket. Refer to Transmission Mount Bracket Replacement - Rear .

  3. 2191544
  4. Remove 2 transmission rear mount nuts (3) and 2 transmission rear mount bolts (1).
  5. Remove transmission rear mount (2).

Installation Procedure


    2191544
  1. Install transmission rear mount (2).
  2. Install 2 transmission rear mount bolts (1).
  3. Caution: Refer to Fastener Caution in the Preface section.

  4. Install 2 transmission rear mount nuts (3) and tighten to 110 N·m (81 lb ft).
  5. Install transmission rear mount bracket. Refer to Transmission Mount Bracket Replacement - Rear .
  6. Install steering gear. Refer to Steering Gear Replacement : Hydraulic Power Steering → Electronic Power Steering .
   


© Copyright Chevrolet. All rights reserved