To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Transmission Mount Bracket Replacement - Rear

Removal Procedure
  1. Raise vehicle. Refer to Lifting and Jacking the Vehicle .
  2. Support rear of powertrain using a suitable jack stand.

    3. 2191540
  3. Remove transmission rear mount bolt (1).

    4. 2191541
  4. Remove 3 transmission rear mount bolts (1).
  5. Remove transmission rear mount (2).

Installation Procedure

    2191541
  1. Install transmission rear mount (2).

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install 3 transmission rear mount bolts (1) and tighten to 100 N·m (74 lb ft).

    3. 2191540
  3. Install transmission rear mount bolt (1) and tighten to 100 N·m (74 lb ft).
  4. Remove jack stand.
  5. Lower vehicle.
   


© Copyright Chevrolet. All rights reserved