Service Information

Callout

Description

Vehicle Certification Label

The vehicle certification label is located on the driver side B pillar and displays the following assessments:

•	Gross Vehicle Weight Rating (GVWR)

•	Gross Axle Weight Rating (GAWR), front and rear

•	The gross vehicle weight (GVW) is the weight of the vehicle and everything it carries. The gross vehicle weight must not exceed the Gross Vehicle Weight Rating. Include the following items when figuring the GVW:

—	The base vehicle weight (factory weight)

—	The weight of all vehicles accessories

—	The weight of the driver and the passengers

—	The weight of the cargo

Logo

Name of Manufacturer

Gross Vehicle Weight Rating

Gross Axle Weight Rating (Front, Rear)

Vehicle Class Type (Pass Car, etc.)

Canadian Safety Mark (w/RPO Z49)

National Emission Mark (w/RPO Z49)

Certification Statement

Vehicle Identification Number

Final Manufacturers Date (Month/Year)

Tyre Placard

The tire placard label is located on the driver side B pillar and displays the following assessments:

Specified Occupant Seating Positions (Total, Front and Rear)

Maximum Vehicle Capacity Weight (kg and lbs)

Tire Pressure, Front, Rear, and Spare (Cold)

Original Equipment Tires Size

Service Parts ID Label

The vehicle service parts identification label is located on the inner side of the glove box lid. The label is use to help identify the vehicle original parts and options.

Model Designation (Vehicle Division, Line, and Body Style)

GM Order Number

Wheel Base

Vehicle Identification Number

Interior/Exterior Color (Number)

Regular Production Options/Special Equipment Options (RPO/SEO) Printed in Alpha-Numeric Sequence

Interior/Exterior Color (Number)

Paint Technology

Anti-Theft Label

The Federal law requires that General Motors label certain body parts on this vehicle with the VIN. The purpose of the law is to reduce the number of motor vehicle thefts by helping in the tracing and recovery of parts from stolen vehicles.

Labels are permanently affixed to an interior surface of the part. The label on the replacement part contains the letter R, the manufacturer's logo, and the DOT symbol.

The anti-theft label must be covered before any painting, rustproofing procedures, and uncovered after the procedures. Failure to follow the precautionary steps may result in liability for violation of the Federal Vehicle Theft Prevention Standard and possible suspicion to the owner that the part was stolen.

Vehicle Certification, Tyre Placard, Anti-Theft, and Service Parts ID Label