To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Clutch Actuator Cylinder Pipe Replacement - F40

Removal Procedure

  1. Remove the manual transmission. Refer to Transmission Replacement .

  2. 2373094
  3. Remove the clutch actuator cylinder pipe connector (1) from the clutch housing.
  4. Detach the clutch actuator cylinder pipe nut (3).
  5. Remove the clutch actuator cylinder pipe (2).

Installation Procedure


    2373094
  1. Install the clutch actuator cylinder pipe (2).
  2. Install the clutch actuator cylinder pipe connector (1) to the clutch housing.
  3. Caution: Refer to Fastener Caution in the Preface section.

  4. Install the clutch actuator cylinder pipe nut (3) and tighten to 18 N·m (13 lb ft).
  5. Install the manual gearbox. Refer to Transmission Replacement .
   


© Copyright Chevrolet. All rights reserved