To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

DTC P0219 — LNP or LNQ

Diagnostic Instructions

    • Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure.
    • Review Strategy Based Diagnosis for an overview of the diagnostic approach.
    • Diagnostic Procedure Instructions provides an overview of each diagnostic category.

DTC Descriptor

DTC P0219 00: Engine Overspeed

Circuit/System Description

Note: This DTC is used for information only. This DTC does NOT indicate there is a condition with the crank sensor or the engine control module (ECM).

This DTC is used to indicate that the engine speed exceeded the fuel cutoff limit in gear. This DTC may set if the transmission is placed in a low gear while driving down a steep grade or travelling at a high speed.

Conditions for Running the DTC

    • The engine is running.
    • The DTC runs continuously once the above condition is met.

Conditions for Setting the DTC

The ECM detects the engine speed is greater than the threshold for greater than 0.5 s.

Action Taken When the DTC Sets

DTC P0219 00 is a Type C DTC.

Conditions for Clearing the DTC

DTC P0219 00 is a Type C DTC.

Reference Information

Electrical Information Reference

    •  Circuit Testing
    •  Connector Repairs
    •  Testing for Intermittent Conditions and Poor Connections
    •  Wiring Repairs

DTC Type Reference

Powertrain Diagnostic Trouble Code (DTC) Type Definitions

   


© Copyright Chevrolet. All rights reserved