To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Front Wing Replacement


2373495

Callout

Component Name

Preliminary Procedures

  1. Remove the front bumper fascia. Refer to Front Bumper Fascia Removal and Installation .
  2. Remove the front wing wheel opening moulding. Refer to Front Wing Wheel Opening Moulding Replacement .
  3. Remove the headlamp. Refer to Headlamp Replacement .
  4. Remove the front bumper fascia outer guide. Refer to Front Bumper Fascia Guide Replacement .
  5. Remove the front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement .
  6. Remove the front wing insulator. Refer to Front Wing Insulator Replacement .
  7. Remove the front wing shipping cover. Refer to Front Wing Shipping Cover Replacement .
  8. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement .
  9. Loosen sill panel moulding partially. Refer to Sill Panel Moulding Replacement .

1

Front Wing Bolt (Qty: 6)

Caution : Refer to Fastener Caution in the Preface section.

Tighten
9 N·m (80 lb in)

2

Front Wing Bolt (Qty: 2)

Tip
Just loosen the bolt.

Tighten
9 N·m (80 lb in)

3

Front Wing

Procedure

Adjust the front wing as needed. Refer to Front Side Door Adjustment and Bonnet Adjustment .

   


© Copyright Chevrolet. All rights reserved