To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Front Side Door Adjustment


2373497

Callout

Component Name

Preliminary Procedures

Remove the front wheelhouse liner. Refer to Front Wheelhouse Liner Replacement .

1

Front Side Door

Caution : Refer to Fastener Caution in the Preface section.

Procedure

  1. Loosen the front side door hinge bolt (Qty: 4) to adjust the front side door.
  2. Adjust the front side door in order to obtain an even gap between the front side door and the roof, the rear door, the rocker panel and the front wing and so that the front side door is flush with the roof, the rear door, the rocker panel and the front wing.

Adjustment

    • Front side door to roof
        (a) 6 mm ± 1 mm (0.24 in ± 0.04 in)
    • Front side door to rear side door
        (b) 3.5 mm ± 0.75 mm (0.14 in ± 0.03 in)
    • Front side door moulding to sill panel moulding
        (c) 5 mm ± 1 mm (0.2 in ± 0.04 in)
    • Front side door to front wing
        (d) 3.5 mm + 0.75 mm - 0.5 mm (0.14 in + 0.03 in - 0.02 in)

Tighten
25 N·m (18 lb ft)

   


© Copyright Chevrolet. All rights reserved