To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Rear Side Door Adjustment


2449887

Callout

Component Name

1

Rear Side Door

Caution : Refer to Fastener Caution in the Preface section.

Procedure

  1. Loosen the rear door hinge bolt (Qty: 4) to adjust the rear door.
  2. Adjust the rear door in order to obtain an even gap between the rear door and the roof, the quarter outer panel, the rocker panel and the front side door and so that the rear door is flush with the roof, the quarter outer panel, the rocker panel and the front side door.

Adjustment

    • Rear side door to rear quarter panel
        (a) 3.5 mm ± 0.75 mm (0.14 in ± 0.03 in)
    • Rear side door moulding to sill panel moulding
        (c) 5 mm ± 1 mm (0.2 in ± 0.04 in)
    • Rear side door to front side door
        (c) 3.5 mm ± 0.75 mm (0.14 in ± 0.03 in)
    • Rear side door to roof
        (d) 6 mm ± 1 mm (0.24 in ± 0.04 in)

Tighten
25 N·m (18 lb ft)

   


© Copyright Chevrolet. All rights reserved