To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Liftgate Adjustment


2373519

Callout

Component Name

1

Liftgate

Caution : Refer to Fastener Caution in the Preface section.

Procedure

  1. Loosen the liftgate hinge bolts (Qty: 4).
  2. Adjust the tailgate in order to obtain an even gap on both sides between the tailgate and the quarter outer panel, the rear bumper fascia and the roof and so that the tailgate is flush with the quarter outer panel, the rear bumper fascia and the roof.

Adjustment

    • Liftgate to quarter outer panel
        (a) 3.5 mm ± 1 mm (0.14 in ± 0.04 in)
    • Liftgate to rear bumper fascia
        (c) 5 mm ± 1 mm (0.2 in ± 0.04 in)
    • Tailgate to tail light
        (c) 4 mm ± 1.5 mm (0.16 in ± 0.06 in)
    • Tailgate to roof
        (d) 5.5 mm ± 1.0 mm (0.22 in ± 0.04 in)

Tighten
22 N·m (16 lb ft)

   


© Copyright Chevrolet. All rights reserved