To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Liftgate Weatherstrip Replacement


2449885

Callout

Component Name

1

Liftgate Weatherstrip

Procedure

  1. Start at the upper corner of the trunk opening and pull the weatherstrip away from the trunk opening flange.
  2. Position the weatherstrip in the upper corner of the trunk opening.
  3. Working downward along the edge, install the weatherstrip on the trunk opening flange ensuring that the carrier is fully seated in the corners.
  4. Using a rubber mallet, ensure that the weatherstrip is seated on the entire boot opening flange.
   


© Copyright Chevrolet. All rights reserved