To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Front Side Door Weatherstrip Replacement - Body Side


2373501

Callout

Component Name

1

Front Side Door Weatherstrip - Body Side

Procedure

  1. Start at the rear upper corner of the door opening and pull the weatherstrip away from the door opening flange.
  2. Position the weatherstrip in the upper corner of the centre pillar.
  3. Working downward along the front edge, install the weatherstrip on the door opening flange ensuring that the carrier is fully seated in the corners.
  4. Using a rubber mallet, ensure that the weatherstrip is seated on the entire door opening flange.
   


© Copyright Chevrolet. All rights reserved