To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Headlamp and Front Bumper Fascia Mount Panel Replacement


2373509

Callout

Component Name

Preliminary Procedures

  1. Remove the front bumper fascia. Refer to Front Bumper Fascia Removal and Installation .
  2. Remove the headlamps. Refer to Headlamp Replacement .
  3. Remove the bonnet hold-open rod. Refer to Bonnet Hold-Open Rod Replacement .
  4. Remove the bonnet primary and secondary catches. Refer to Bonnet Primary and Secondary Catch Replacement .

1

Headlamp and Front Bumper Fascia Mount Panel Bolt (Qty: 4)

Caution : Refer to Fastener Caution in the Preface section.

Tighten
22 N·m (16 lb ft)

2

Headlamp and Front Bumper Fascia Mount Panel

   


© Copyright Chevrolet. All rights reserved