To the top of the document
Orlando
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Air Cleaner Inlet Duct Replacement

Removal Procedure
  1. Remove the front bumper fascia. Refer to Front Bumper Fascia Removal and Installation .

    2. 2373226
  2. Remove the inlet air duct bolt (2).
  3. Remove the inlet air duct (1).

Installation Procedure

    2373226
  1. Install the inlet air duct (1).

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the inlet air duct bolt (2) and tighten to 5 N·m (44 lb in).
  3. Install the front bumper fascia. Refer to Front Bumper Fascia Removal and Installation .
   


© Copyright Chevrolet. All rights reserved