Preliminary Procedures

Remove front bumper fascia. Refer to Front Bumper Fascia Removal and Installation .

1

O-ring

2

Refrigerant Pressure Sensor

Caution: Refer to Fastener Caution in the Preface section.

Procedure

1. Disconnect the refrigerant pressure sensor electrical connector.
2. Use GE-39400-A detector leak test A/C compressor fittings.

Tighten
6 N·m (53 lb in)

Special Tools

GE-39400-A Electronic Halogen Leak Detector

For equivalent regional tools, refer to Special Tools .